Waeco BatteryPack BP 124, Operating Manual

Page: 17 / 136

EN
BP124 Using the device
17
6 Using the device
6.1 Charging the lithium-ion battery
!
➤ Place the charger (fig. 3 1, page 3) on a firm base.
➤ Fold the handle of the battery upwards.
➤ Connect the DC connecting lead (fig. 3 2, page 3) of the charger to the
battery (fig. 3 3, page 3).
➤ Connect the charger to the AC power supply.
✓ The LED on the charger shows the battery charge level:
– Red: battery charging is in progress
– Green: the battery is fully charged
I
✓
Charging takes around 5 hours.
I
✓
When the battery is charged up, the charger switches off.
6.2 Supplying the cooler with power
➤
Connect the DC plug to your coolbox.
WARNING!
If batteries are overcharged they may set on fire. Only use the
charger supplied.
NOTE
 The LED also shows green when there is no battery connected
to the charger.
 If the battery has not been charged for a long time, the charger
will not immediately show the charge level. Leave the battery
connected to the charger until the LED shows red.
NOTE
If the battery has been completely discharged, the recharging
process can take up to 10 hours.