EN
7
ASC G Wi-Fi kit
Setting up the Wi-Fi kit
12. Select the
Client mode: Wi-Fi kit connects to an existing network
option.
13. Insert credentials (SSID and password) of the network you want to
connect to.
14. Click on the
Confirm
button.
✔
The ASC is rebooting and the „ASC_UNIT“ network is being disabled.
✔
The ASC connects to the selected network.
15. Disable the „airplane mode“ on your device.
16. Set back the Wi-Fi network connection to the original one on your
device.
✔
You can now connect your device to the ASC (see chapter “Connect-
ing to the ASC” on page 8).
I
5.3
Setting Wi-Fi kit back to Access Point Mode
You can do this either at the ASC‘s control panel (chapter “Setting Wi-
Fi kit to Access Point Mode on the ASC” on page 7) or more comfortable
via a web browser on a connected device (chapter “Setting Wi-Fi kit to
Access Point Mode via web browser” on page 8).
5.3.1
Setting Wi-Fi kit to Access Point Mode on the ASC
1. In the basic menu, use the cursor keys
or
to select
Other selections
:
2. Press
ENTER
to confirm.
3. Use the cursor key
to select
Wi-Fi kit
.
4. Press
ENTER
to confirm.
5. Use the cursor key
to select
Wi-Fi Setup
.
6. Press
ENTER
to confirm.
7. Use the cursor key
to select
Access Point
.
8. Enter a new SSID for the ASC‘s network:
9. Press
ENTER
to confirm.
10. Enter a new password and remember it.
✔
You can now connect your device to the ASC (see chapter “Connect-
ing to the ASC” on page 8).
NOTE
If you want to set the Wi-Fi kit back in Access Point Mode see chapter
“Setting Wi-Fi kit back to Access Point Mode” on page 7.
WaecoWiFiKit_OPM_4445103184_EMEA36_202x-xx-xx.book Seite 7 Mittwoch, 3. Februar 2021 11:33 11
