Waeco AirConServiceCenter ASC 3500 G LE, Operating Manual

Page: 91 / 300

EN
91
ASC2500G/ASC3500G Operation
8.7 Free selection
I
The following three processes can performed individually in the “Free
selection” menu:
 Recycling phase: extraction, recycling of the refrigerant, pressure rise
test, draining the waste oil.
 Vacuum phase: evacuation of the system, leak test / vacuum check.
 Filling phase: filling with fresh oil, filling of UV additive, filling of refrig-
erant.
After each process has been performed, a service report is printed.
1. Start by fitting the connections of the AirConServiceCenter to the
vehicle air conditioning system, and opening them.
2. In the basic menu, use the cursor keys  or  to select “Free
selection” :
3. Press ENTER to confirm.
4. Enter the vehicle data and press ENTER to confirm.
NOTE
The “Free selection” menu is used to perform air conditioning
servicing step-by-step. You can perform the same processes as in the
short selection menu, but also omit individual procedures. In addition, it
is possible to enter the values for each individual process using the key-
pad. You can also enter the vehicle data for the service report in this
menu.
Short selection
Free selection
Other selections
ENTER-OK