Contents
Index
Contents
41
Index
41
REPLACING THE PEN NIB
The pen nib (tip) will wear with normal use. Excessive pressure will cause it to wear sooner. Replace the nib
when it gets too short or develops a flat point.
1. Clasp the old nib and pull it straight out of the pen. Use the nib removal tool, pair of tweezers, needle-
nosed pliers, or similar instrument.
2. Slide the end of the new nib straight into the barrel of the pen. Firmly push the nib until it stops.
Warning: Choking hazard. Prevent children from swallowing the pen nib or button part. The
pen nib or button part may accidentally be pulled out if children are biting on them.
For replacement parts, see
ordering parts and accessories
.
Important: When not in use, place the pen in the pen holder or lay it flat on your desk. When
equipped, the eraser end of the pen should be inserted first into the loop. To maintain the sensitivity
of your pen, do not store the pen in a container where it will rest on the tip or eraser.
Nib
Replace when 1 mm
(0.4 inch) or less.
