7
7
INKLING RECEIVER
The receiver can digitally store hundreds of multiple-layer sketches that you create with the
. The receiver also functions as a standard USB flash drive. See
.
USB port
Battery compartment
Located at back of unit.
See
New layer button
Press to create a new layer.
See
Receiver clip
(with new file button located beneath the clip)
A new sketch file is created when you open and close
the clip. See
attaching the receiver to paper
Power button
Press to turn on or off. See also
Sensor lens
As you sketch, keep a clear line of sight
between the lens and the pen tip cone.
See
.
Reset button
Located on bottom of receiver. Use the end of a
paper clip or other pointed object to press
button. This returns the receiver to factory
default conditions.
Examples of when you may need to use the reset
button are described under
.
Power, status, and new layer LEDs
.