13
13
STATUS LIGHTS
LEDs indicate the operational status of your Inkling:
INKLING DIGITAL PEN
LED INDICATIONS
Pen LED
Off: Pen not in use, in sleep mode, or battery has fully drained.
Green: Pen in use, battery charge okay.
Red: Low battery charge.
INKLING RECEIVER
LED INDICATIONS
Power LED
Off: Receiver is powered off, or battery has fully drained.
Blinking: During initial power-up, the power LED will blink until the receiver is
ready.
Green: Receiver is powered on and ready for use. When connected to USB
source, indicates battery is fully charged.
Red: Battery charge is low. When connected to a powered USB source,
indicates battery is charging.
Status LED
Off: Pen not in use or no pen reception.
Green: Pen in use and data reception is good.
New layer LED
Green (1 second duration):
Lights when new layer button is pressed. Indicates creation of new layer.
Lights when paper is clipped into receiver. Indicates creation of new sketch
file.
INKLING CHARGING CASE
LED INDICATIONS
Pen charging status LED
Off: Not connected to powered USB source or the pen is not in the charging
case. If both the pen and receiver are in the case and it is connected to a low-
power USB port (100 mA or less), they will not charge and the LED will be off.
Green: Pen fully charged.
Red: Pen charging.
Pen LED
Power LED
Status LED
New layer LED
Pen charging status LED
Receiver power LED
status is visible through
charging case top.
