background image

Appendix
Page  78

LICENCE WARRANTY CONDITIONS

(EUROPE, AFRICA AND MIDDLE EAST)

SOFTWARE LICENCE AGREEMENT

Important customer information

The scope of delivery of this product covers copyright-protected computer programs ("software"), which are 
the inalienable intellectual property of WACOM Europe GmbH ("WACOM").  This software is an integral 
component of the product and is also held on the associated data carrier.  The software of WACOM and the 
associated rights of use are not included with the purchase of this product from your retailer.  WACOM grants 
you-the user-the right to use the software exclusively in accordance with the conditions stipulated in this licence 
agreement.  By purchasing this product, you agree to the following licence conditions.

Conditions for using the software

WACOM issues the user with a personal, non-exclusive licence to use the software solely in connection with this 
product and for the correct operation of the product.  This licence may only be assigned to a third party in 
connection with this product.
Use of this software includes the creation of permanent or temporary copies of the software by means of loading, 
displaying, exporting, transferring or saving, for the purposes of exporting the commands and the data they 
contain or for observing, researching or testing the software functions.
The customer may not license the software to a third party, lease, lend or in any other way provide access to the 
software. The customer may not copy, change, transfer or edit the software without prior written agreement from 
WACOM. The only exceptions to this are necessary procedures for creating a back-up copy and the scenarios 
outlined in section 2. 
The customer may not carry out any "reverse engineering", decompile or depacketise the software, or try by any 
other means to discover the source code of the software. This restriction shall continue to apply after the 
termination of this agreement. If the software contains interfaces to other programs that are not supported by 
WACOM, WACOM shall provide the customer with the necessary information on request, as long as the customer 
can prove his right to use the software and agrees to bear the copying and postage costs.
WACOM AND ITS SUPPLIERS CANNOT OFFER ANY GUARANTEE FOR THE PERFORMANCE OF THE 
SOFTWARE OR FOR THE RESULTS PRODUCED THERE FROM. WACOM AND ITS SUPPLIERS OFFER NO 
GUARANTEES OR ASSURANCES (EITHER EXPRESSLY OR IMPLICITLY, INCLUDING THOSE THAT MAY BE 
DERIVED FROM A BUSINESS RELATIONSHIP OR FROM TRADE PRACTICE, OR FROM LEGAL PROVISIONS 
OR CUSTOMARY LAW) WITH REGARD TO THE MARKETABILITY, FREEDOM FROM DEFECTS OF TITLE OR 
USEFULNESS OF THE SOFTWARE.
WACOM AND ITS SUPPLIERS ACCEPT NO LIABILITY FOR DAMAGES, CLAIMS OR COSTS OF ANY KIND, NOR 
FOR CONSEQUENTIAL DAMAGES, SECONDARY, ACCIDENTAL, INDIRECT OR PENAL DAMAGES, 
PARTICULAR OR MISCELLANEOUS DAMAGES OR FOR DEMANDS OR INDEMNITY CLAIMS FOR REDUCED 
PROFITS OR LOSSES. THIS SHALL ALSO APPLY IN THE CASE OF A REPRESENTATIVE OF WACOM BEING 
PREVIOUSLY AWARE OF THE POSSIBILITY OF SUCH LOSSES, DAMAGES, CLAIMS OR COSTS, OR 
DEMANDS FROM THIRD PARTIES.

Summary of Contents for DTK-2100 - INSTALLATION AND





























































































Reviews: