Wacom DTK-2100 - INSTALLATION AND Installation Manual Download

Page: 41 / 92

Customizing

Page 39

Menu options are available when you open the On Screen Display (OSD).

OSD P

OSITION

options include:

•

ERTICAL

. Adjusts the vertical position of the OSD menu window.

•

ORIZONTAL

. Adjusts the horizontal position of the OSD menu

window.

•

RANSPARENCY

. Changes the opaqueness of the OSD menu

background.

OLOR

options include:

•

5000K, 6500K, 9300K. Enables you to adjust the pen display color
temperature, in degrees Kelvin.

•

IRECT

displays the colors directly from the video card without any

adjustment. When selected, contrast or brightness cannot be
adjusted.

•

USTOM

enables you to independently adjust the R

, G

REEN

, and

LUE

display colors.

Note: Any changes you manually make to the color settings will

invalidate the color profile.

ANGUAGE

options allow you to choose the language in which to display

the OSD menu.

ISPLAY

options include:

•

ONTRAST

. Increases or decreases image contrast. Changes in

contrast may affect color accuracy.

•

RIGHTNESS

. Increases or decreases the image brightness.

•

ACKLIGHT

. Increases or decreases the backlight brightness level.

Summary of Contents for DTK-2100 - INSTALLATION AND





























































































Search results

Summary of Contents for DTK-2100 - INSTALLATION AND

Reviews:

Related manuals for DTK-2100 - INSTALLATION AND

Brands by name

Popular brands

Wacom DTK-2100 - INSTALLATION AND, Installation Manual

Search results

Summary of Contents for DTK-2100 - INSTALLATION AND

Reviews:

Related manuals for DTK-2100 - INSTALLATION AND

Brands by name

Popular brands