background image

Appendix
Page  52

RADIO AND TELEVISION INTERFERENCE

The equipment described in this manual generates, uses, and can radiate radio-frequency energy.  If it is not 
installed and used properly – that is, in strict accordance with applicable instructions – it may cause interference 
with radio and television reception.

FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 
of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a 
residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications.  However, there is no 
guarantee that interference will not occur in a particular installation.

You can determine whether the equipment is causing interference by powering it off.  If the interference stops, it 
was probably caused by the equipment.

If the equipment does cause interference to radio or television reception, you may be able to correct the 
interference by using one or more of the following measures:

Rotate the television or radio antenna until the interference stops.

Move the equipment farther away from the television or radio.

Plug the equipment and computer into an outlet that is on a different circuit from the television or radio.

If necessary, consult your Wacom dealer or an experienced radio/television technician for help.

Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate 
your authority to operate the product.

DTF720_Manual.fm  Page 52  Monday, December 22, 2008  9:17 AM

Summary of Contents for DTF-720 - OTHER





























































Reviews: