background image

20

To insert a new nib:

To remove the old nib:

Prevent your children from swallowing the UltraPen nib or side switch. The pen nib or
side switch may accidentally be pulled out if children are biting on them.

CAUTION

Slide it straight into the barrel of the
pen. Firmly push the nib until it stops.
The new nib will slide into the correct
position.

Clasp it with the o-ring tool that came
with your UltraPen and pull the old nib
straight out of the pen.

Caring For Your Cintiq 15X

Cleaning Your Cintiq 15X

To clean the Cintiq 15X casing, use a soft cloth with mild detergent (such as dish washing liquid) diluted with

water.  Do not use paint thinner, benzine, alcohol, or other organic solvents to clean the Cintiq 15X casing or

pen.

Do not use detergent to clean the cover glass. This may alter the surface friction and deteriorate the

handwriting feel.  To clean the cover glass of the Cintiq 15X, use a soft, dry cloth. If necessary, slightly moisten

the cloth with water and try again. When cleaning, apply only a light amount of pressure to the cover glass

and do not make the surface wet.

Replacing the Pen Tip

The pen tip will wear with normal use. When the nib gets too short, you can replace it with one of the extra

nibs that came with your UltraPen. If the pen tip wears and becomes angular, it may damage the coating on

the cover glass of the Cintiq 15X Interactive Pen Display. To avoid this, periodic nib replacement is recom-

mended.

UM-0251/Cintiq AP.pm65

01.7.31, 9:27 PM

20

Summary of Contents for CINTIQ 15X


























Reviews: