WACO VC1803, User Manual, Page: 8 / 38

When you use the drainage pipe, please reference the picture below.
IMPORTANT NOTES:
Placing the dehumidifier on an uneven surface or improper hose installation may result in water filling up the water
tank and causing the unit to shut off. Empty water tank if shutoff occurs, then check dehumidifier location and hose
for proper setup. The tank must be in place and securely seated for the dehumidifier to operate.
MAIN FEATURE
Dehumidify mode
- Press the Mode button to choose Dehumidify mode.
- The Dehumidify mode indicator will light up on the control panel.
- Press the Fan button to choose High or Low fan speed, the corresponding fan speed indicator will light up.
- Press the Humidity button to cycle choose (70% - 60% - 50% - 40%) desired room humidity.
Turbo mode
- Press the Mode button to choose Turbo mode.
- The Turbo mode indicator will light up on the control panel.
- In this mode, fan speed is high and cannot change, the humidity is set at 30% and all humidity indicators are off.
Clothes Drying Mode
- Press the Mode button to choose Dry mode.
- The Dry mode indicator will light up on the control panel.
- In this mode, fan speed is high and cannot change, the humidity is set at 15% and all humidity indicators are off.
- In this mode, the Timer function cannot be used. If Dry mode is chosen, after 24 hours it will change to
Dehumidify mode if there is no operation.
Continuous mode
- Press the Mode button to choose Continuous mode.
- The Continuous mode indicator will light up on the control panel.
- In this mode, the humidity is set at 15% and all humidity indicators are off.
- Press the Fan button to choose High or Low fan speed, the corresponding fan speed indicator will light up.
- In this mode, the Timer function cannot be used.