Wacker Neuson RD 16, Operator'S Manual, Page: 102 / 244

Technical Data RD 16
102
wc_td000312gb.fm
6.5 Sound Measurements
The operating sound level, measured per the requirements of
Appendix 1, Paragraph 1.7.4.f of the EC-Machine Regulations, is:
• the guaranteed sound power level (L
WA
):
• 106 dB(A)
• the sound pressure level at operator’s location (L
pA
):
• 88.1 dB(A)
This sound value was determined according to ISO 3744 for the sound
power level (L
WA
).
6.6 Measurements of Operator Exposure to Vibration
The operator of this machine should expect to be exposed to vibration
levels listed below when using the machine in performance of its
normally intended function:
• Maximum hand/arm vibration levels are:
2.2 m/s
2
(7.2 ft/s
2
)
• These are the representative values of the weighted root mean
square
(rms) acceleration to which the hands and arms are sub-
jected. These weighted rms values are measured according to
ISO 5349-1.
• Whole body vibration levels do not exceed:
0.3 m/s
2
(1 ft/s
2
)
• These are the representative values of the weighted root mean
square
(rms) acceleration to which the whole body is subjected.
These weighted rms values are measured according to ISO
2631-1.
The results are compliant to the limit and action vibration values (hand/
arm and whole body) as specified in European directive 2002/44/EC.
HAV Uncertainties
Hand-transmitted vibration was measured per ISO 5349-1. This
measurement includes an uncertainty of 1.5 m/sec
2
.