Wacker Neuson PTS 4V, Operator'S Manual

Page: 26 / 60

wc_tx003330gb.fm
26
Operation PTS 4V
4.6 Operation
Pump should begin pumping water within a minute depending on length of suction
hose and height of pump above water. Longer hoses will require more time.
If pump does not prime, check for loose fittings or air leak in suction hose. Make
sure strainer in water is not blocked.
Run engine at full speed while operating pump.
Do not pump corrosive chemicals or water containing toxic substances. These
fluids could create serious health and environmental hazards. Contact local
authorities for assistance.
4.7 Pump Wrench
The wrench (a) supplied with the pump can be used to loosen and tighten: hose
couplings, knobs on pump cover, priming plug, and drain plug on front cover.
Store wrench on pump frame.
4.8 Accessories
Wacker Neuson offers a complete line of fittings, hoses, and clamps to properly
connect the pump to match various job conditions.
WARNING
a