background image

10

MFS735

Safety Information

Safe 

operating 

practices

When operating this machine:

„

Remain aware of the machine’s moving parts. Keep hands, feet, and loose

clothing away from the machine’s moving parts.

When operating this machine:

„

Do not operate a machine in need of repair.

Personal 

Protective 

Equipment 

(PPE)

Wear the following Personal Protective Equipment (PPE) while operating this 

machine:

„

Close-fitting work clothes that do not hinder movement

„

Safety glasses with side shields

„

Hearing protection

„

Safety-toed footwear

Transporting 

and installing 

the machine

„

Never allow untrained personnel to operate or service the machine.

„

Do not stand under the machine while it is being hoisted or moved.

„

Do not attach equipment to the machine when it is suspended.

„

Always transport the machine in an upright position.

„

Always position and operate the machine on a firm, noncombustible, level

surface.

General 

Safety

„

Do not operate the machine when open containers of fuel, paint, or other

flammable liquids are near.

„

Do not operate the machine, or tools attached to the machine, with wet hands..

„

Do not enclose or cover the machine when it is in use or when it is hot.

„

Do not operate the machine in snow, rain, or standing water.

„

Do not stand on the machine.

Machine 

vibration

Floorsaw vibrates in normal use. During and after the use of the machine, inspect 

the machine before storing it.

„

Have damaged items repaired or replaced as necessary.

„

Do not use plugs or or cords that show signs of damage such as broken or

cracked insulation or damaged blades.

After use

„

Store the machine properly when it is not being used. The machine should be

stored in a clean, dry location out of the reach of children.

Cleaning 

When cleaning and servicing the machine:

„

Keep the machine clean and free of debris such as leaves, paper, cartons, etc.

„

Keep the labels legible.

When cleaning the machine:

„

Do not clean the machine while it is running.

„

Never use gasoline or other types of fuels or flammable solvents to clean the

machine. Fumes from fuels and solvents can become explosive.

Summary of Contents for MFS735-CE













































Reviews: