Wacker Neuson IREN 38, Operator'S Manual, Page: 12 / 46

12
Safety information IREN
3.4 Transport
Switching off the machine
Before you transport the machine, switch it off and pull the plug out of the plug
receptacle. Allow the motor to cool down.
Transporting the machine
Secure the machine on the transport device against tilting, falling or slipping.
Restarting
Machines, machine parts, accessories or tools that were detached for transport
purposes must be re-mounted and fastened before restarting.
Only operate in accordance with the operating instructions.
3.5 Operating safety
Work environment
Familiarize yourself with your work environment before you start work. This in-
cludes e.g. the following items:
„
Obstacles in the work and traffic area.
„
Load-carrying capacity of the ground.
„
The measures needed to cordon off the construction site from public traffic.
„
The measures needed to secure walls and ceilings.
„
Options available in the event of an accident.
Starting the machine
Observe the safety information and warning notices located on the machine.
Never attempt to start a machine that requires maintenance or repairs.
Start the machine as directed in the operator's manual.
Avoid body contact with grounded components.
Vertical stability
Always make sure that you maintain a safe distance when working with the ma-
chine. This applies particularly when working on scaffoldings, ladders, etc.
Switching off the machine
Switch the machine off and pull the plug out of the plug receptacle: Before taking
a break or if the machine will not be used.
Before storing the machine, wait until it has completely stopped running.
Set or place the machine in such a way that it cannot tilt, fall or slip.