Wacker Neuson HDR115, Operator'S Manual

Page: 49 / 58

wc_tx004155gb_FM10.fm
49
HDR 115 Maintenance
7.3 Removing the Access Panel
Requirements
■
Machine shut down and cool
■
Machine properly positioned
Overview Your machine is equipped with removable access panels. The access panels must
be removed in order to maintain and repair certain machine components such as
the burner, electric motor, and fuel pump.
Procedure Perform the procedure below to remove the access panel.
1. Shut down the machine and allow it to cool.
2. Disconnect the power cord from the power source.
3. Remove the screws (a) that fasten the access panel (b) , and remove the panel
and set it aside.
4. Perform the required maintenance.
5. When maintenance is complete, re-install the access panel and fasten it with the
screws.
CAUTION
Hot surface hazard. The machine surfaces may be hot.
►
Allow the machine to cool for a minimum of ten minutes before touching it.
wc_gr013146
b
b
a