Wacker Neuson DPU 3050H, Operator'S Manual, Page: 37 / 64

9 Maintenance
37
9.1 Maintenance schedule
9.1.1 One-time maintenance after initial operation
Note: The following maintenance tasks need only be performed after initial
operation at this interval.
9.1.2 Daily maintenance work
Maintenance work After the
first
25 hours
Change engine oil.
„
Check the valve clearance,
set to 0.10 mm when the en-
gine is cold. *
* Have these tasks carried out by the service
department of your Wacker Neuson con-
tact person.
„
Maintenance work Daily before
operation Daily after
operation
Check the intake area of the
combustion air and cooling
air.
„
Check engine oil level.
„
Check water separator.
„
Check fuel tank:
- Fuel level.
- Leaks.
- Lines for leaks.
- Check the tank seal for
leaks – change, if neces-
sary.
„
Check the air cleaner mainte-
nance indicator while the en-
gine is running.
Clean or replace the filter ele-
ment as needed.
„
Check that Bowden cable
moves freely.
„
Clean the machine.
„