Wacker Neuson DPU 3050H, Operator'S Manual, Page: 32 / 64

8 Use and operation
32
8.2 Starting up
8.2.1 Starting the engine with recoil starter
Note: Do not start the engine until you are sure that it is vertically stable.
1. Set throttle lever to position 1.
2. Slowly pull out the recoil starter until you feel compression.
3. Let the cable rewind from this compression point.
4. Start now by gradually accelerating the engine via the cable (not in a jerking
manner as with gasoline engines). Use the entire length of the cable.
Item Designation
1 Throttle lever
2 Recoil starter