background image

9 Maintenance

23

100_0202_mt_0012.fm

9

Maintenance

WARNING

Improper handling can lead to injuries or serious material damage.

Read and observe all safety instructions in this manual.

WARNING

Danger of poisoning from exhaust fumes.
Exhaust fumes contain poisonous carbon monoxide, which can lead to unconsciousness 
or to death.

Only perform maintenance jobs with the engine switched off and the machine 
decommissioned.

WARNING

Risk of injury from uncontrolled starting of the machine and moving parts.

Only perform maintenance jobs with the engine switched off and the machine 
decommissioned.

WARNING

Risk of fire and explosion from fuel and fuel vapors.
Fuel and fuel vapors may ignite or catch fire and cause serious burns.

Do not smoke.

Do not refuel near open flames.

Switch off the engine and allow to cool before refueling.

WARNING

Warning of hot surfaces
The exhaust system and engine can heat up greatly after even a short period of time, 
which can lead to severe burns on contact with skin.

Always allow the machine to cool down after use.

If the cool-down phase cannot be adhered to (e.g. due to an emergency), use heat-
resistant protective gloves.

WARNING

Risk of injury due to non-existent or non-functioning safety devices.

Only operate the machine if the safety devices are properly fixed and functioning.

Do not modify or remove safety devices.

Summary of Contents for DPS 1850



































Reviews: