Wacker Neuson DF 16, Operator'S Manual

Page: 43 / 48

DF 16 10 Maintenance
Operator's manual 41
Greasing the fixing spring
1. Pull the magazine tensioner back against the spring resistance until it engag-
es in park position.
2. Remove tie strip if applicable.
3. Apply some copper grease to the fixing spring.
Inserting tie strips
1. Insert tie strips. Ensure the correct position of the tie strip:
„
Adhesive side (green) downwards.
„
Outlet of the ties forward.
„
Lettering Wacker Neuson facing upwards.
2. Pull the magazine tensioner back until the lock releases and slowly guide it
forwards to the tie strip. Do not let the magazine tensioner "jump".
3. Checking the position of the tie strip: The ties must lie flat. Ties must not pro-
trude.
Closing and loading the machine
1. Close the lid.
2. Close both locks. Do this by pulling the tabs over the holders.
3. Load the machine. Do this by moving the handle forwards and back once,
slowly and evenly and right to the stops.
Note: When the stop is reached a distinct clicking sound is heard.
10.2.5 Thorough cleaning of the machine
Tie adhesive residue could enter the interior of the machine due to the extending
and retracting of the spindle. This residue must be removed from time to time to
prevent damage to the sensitive mechanics.
The machine must be disassembled for thorough cleaning. You must only have
thorough cleaning performed by the service department of your Wacker Neuson
representative.
NOTICE
Damage to the sensitive mechanics due to improper maintenance.
f
Only have thorough cleaning performed by the service department of your
Wacker Neuson representative.