Wacker Neuson DF 16, Operator'S Manual

Page: 32 / 48

8 Use and operation DF 16
30 Operator's manual
Placing the reinforcing steel rods directly adjacent to each other
Always press the reinforcing rods together, so that the tie can clasp around them.
If the reinforcing steel rods are not adjacent to each other, the tie tabs may not
be able to hook up. The tie will remain stuck in the machine and become jammed.
Maintaining the minimum distance to the formwork
Maintain the minimum distance to the formwork, so that the tie can always hook
up.
If you do not observe the minimum distance, the tie tabs may not be able to hook
up. The tie will remain stuck in the machine and become jammed.
NOTICE
Damage to the machine due to jammed ties.
f
Remove jammed ties before continuing work.
NOTICE
Damage to the machine due to jammed ties.
f
Remove jammed ties before continuing work.