Wacker Neuson CRT 48-31V-ES, Operator'S Manual

Page: 52 / 56

TROWEL BLADES AND PANS
• Do not attempt to clean, service or perform
adjustments on the trowel while it is running.
• Do not remove while the trowel is hanging
overhead. Always support the trowel securely on
a flat, level surface before changing blades or
pans.
• Always handle blades and pans carefully. Worn
blades or pans may develop sharp edges that
can cause serious cuts.
• Always replace worn or damaged parts with
service parts designated by the manufacturer.
• Replace blades and pans as a complete set –
even if only one blade or pan is showing wear or
damage. They can wear differently depending on
different jobs, and a difference in blade size will
damage the finish of the slab surface.
HYDRAULIC SYSTEMS
Hydraulic fluid systems operate under high
pressure. Even a small leak can have enough force
to penetrate the eyes or skin. If injury occurs, seek
immediate medical treatment by a physician
familiar with injuries that are caused by hydraulic oil
escaping under pressure.
Use a piece of wood or cardboard to find hydraulic
oil leaks. Do not use your bare hands.
Wear safety glasses to prevent injuries to the eyes.
PERFORM MAINTENANCE SAFELY
21
Trowel.qxd 11/24/04 10:18 AM Page 21
Do you understand this AEM manual and items
such as –
• Your safety program?
• Your trowel manufacturer’s manual(s)?
• Proper clothing and personal safety equipment?
• Your trowel’s controls, warning signs and
devices, and safety equipment?
• Proper trowel lifting and moving procedures?
• How to inspect and start your trowel?
• How to check your trowel for proper operation?
• Proper working procedures?
• Proper shut down procedures?
• Your work area and any special hazards that
may exist?
• Under what conditions you should not operate
your trowel?
If you do not understand any of these items,
consult with your supervisor before operating your
trowel.
TEST YOUR KNOWLEDGE
22
Trowel.qxd 11/24/04 10:18 AM Page 22