Wacker Neuson CRT 48-31V-ES, Operator'S Manual

Page: 19 / 56

CRT 48-31V-ES Operation
wc_tx000143gb.fm
17
4. Operation
4.1 Description
The Riding Trowel is a modern, high production machine. Finishing
rate will vary depending on operator skill and job conditions. The
heavy-duty gearboxes are designed to provide exceptional
performance, low maintenance, and trouble-free use in most
conditions. The low speed unit is designed to provide higher torque, to
optimize performance with the use of pans. However, either machine
can be configured to be non-overlapping or overlapping, and can
therefore use either two pans or ten finishing blades.
All WACKER Riding Trowels are equipped with a fail-safe kill circuit
and a low oil shutdown added job safety and engine protection.
Operating time between fuel refills is approximately 4–4½ hours with
rotor speeds between 80 and 120 rpm.
WACKER Riding Trowels are the most technically advanced trowels
on the market today. With proper maintenance and use, your Riding
Trowel will provide you with exceptional service.