Safety information
SV00069en.fm
10
2.4
Maintenance
2.4.1
Only use original spare parts. Alterations to this machine, incl.
adjustments of the maximum engine speed set by the manufacturer
may only be carried out with the express permission of WACKER. In
case of non-observance, all liability shall be refused.
2.4.2
Maintenance work may only be carried out when the drives are
stationary. If a spark plug connector is present, this should be
removed. This procedure may only be waived if the work cannot be
carried out when the motor is switched off.
2.4.3
While using vibrating plates with an electronic start, the battery must
be disconnected in each case before working on the electrical parts of
the machine.
2.4.4
Hydraulic lines must be depressurized before working on them. Great
care is required when disassembling hydraulic lines, as the oil can
reach temperatures of up to 80 °C. Protect the eyes from splashes.
2.4.5
As soon as maintenance and repair jobs have been completed, all
safety devices must be properly reinstalled.
2.4.6
In order to prevent malfunctions, the machine should be cleaned using
a water hose after each use. High pressure cleaners or chemical
agents must not be used.
Summary of Contents for BPU 2540
