Maintenance
T01137GB.fm
45
4.
Maintenance
4.1
Maintenance schedule
Component
Maintenance work
Maintenance
interval
Machine
Check for signs of damage and wear – change, if neces-
sary the components.
Before operation
Safety devices
Main switch
Check for proper functioning – change, if necessary.
Air cleaner
- Check for external damage and a tight fit.
- Check foam and filter element – clean or replace, if ne-
cessary.
8 hours (daily)
Fuel
- Check the tank cap for leakage – change, if necessary.
- Check the fuel level – add fuel as needed.
Drive motor
Monitoring of:
- Excessive vibrations, operating noise.
- Engine oil and fuel leaks.
Engine oil
Check the oil level – add oil as needed.
Miscellaneous
- Check the cutting blade for damage and tightness – re-
place or tighten, if necessary.
- Check the direction of rotation arrow of the cutting bla-
de.
- Check that the height adjustment moves freely.
- Check the water supply.
Engine oil
Initial oil change.
20 hours
Air cleaner
Clean – change, if necessary.
50 hours (weekly)
Belt
Check tension and wear – change, if necessary.
Spark plug
Clean, set electrode gap 0.7-0.8 mm.
100 hours (monthly)
Engine oil
Change.
Fuel filter
Have this replaced by Wacker Neuson service.
Spark protection
Clean.
100 hours (twice a
year)
Filter cup
Clean.
Idle setting
Check idle setting – set if necessary.
300 hours (annually)
Spark plug
Change.
Air cleaner
Change.
Valve clearance
Have this repaired by Wacker Neuson service.
Summary of Contents for BFS 1350AL
Page 1: ...Operator s manual Floor saw BFS 1350AL 0201438en 005 01 2011...
Page 56: ......
Page 57: ......
Page 58: ......