Wacker Neuson BFS 1350AL, Operator'S Manual

Page: 37 / 58

Operation
T01136GB.fm
37
3.6 Assembling the cutting blade
3.6.1 Checking a new cutting blade:
∗
The blade type must be suitable for the material to be cut. Observe the
peripheral speed, refer to the "Technical data"!
∗
The arbor diameter of the cutting blade must precisely fit the shaft to
ensure smooth blade running.
∗
The cutting blade must be undamaged.
Observe the correct direction of rotation of the cutting blade! That me-
ans the rotational direction mark on the cutting blade must correspond
with the rotational direction mark on the cutting blade guard.
3.6.2 Proceed as follows for the assembly of the cutting blade:
1 Fold up the cutting blade guard (1).
2 Prior to the assembly of the cutting blade, clean the spring washers
and the locking pin and check them for damage.