Wacker Neuson AR 75 Series, Operator'S Manual

Page: 15 / 30

Description
T00575GB.fm
15
4. Description
4.1 Operating range
To be used in pre-cast concrete factories for the vibration of forms of
all kinds as well as for installation on vibrating tables, vibrating blocks,
and machines. In building construction and civil engineering to be used
as from vibrators in all pre-cast concrete factories to fit planks, plates,
etc.
4.2 Description of function
In order to be able to mount the external vibrator to the form, resp.
mould, a faced steel plate of approx. 20 mm thickness has to be
attached to the respective mounting point, to which the external
vibrator is affixed by means of four screws M16 - 8.8. By all means
include washer DIN7989 - B18 for assembly of external vibrator. (see
assembly instructions)
4.3 Note
The form, resp. mould material has to have perfect connections and
closures, which might have to be reinforced for the best possible
transmission of vibration, otherwise increased current consumption or
mechanical damage may result from overload of the external vibrator.
4.4 Connection
Prior to connection please check:
The voltage used has to correspond to the data shown on the rating
plate.
Connect the following external vibrator directly to the power net (as
indicated by rating plate):
AR 75/3/200/400
AR 75/3,6/220/440
AR 75/3,6/460
AR 75/3/230/400
AR 75/3/240/415
AR 75/3,6/230/400
AR 75/3,6/318/550
Assembly instructions for the version without plug receptacle
Danger of electrocution!
Only a qualified electrician is permitted to assemble the plug and
perform a safety check according to the directives in effect.
Observe the assembly instructions!
Danger to life