WACKER Group DPU 25..H.., Operator'S Manual

Page: 17 / 36

Transport to work site /Recom-
T00979GB.fm
17
5. Transport to work site /Recommendations on
compaction
5.1 Transport to work site
Conditions:
∗
To transport the vibration plate, use only suitable lifting equipment with
a minimum load-bearing capacity of 200 kg.
∗
Only attach suitable tackle at the central lifting point (15) provided.
∗
Always tie down the vibratory plate by the protective frame (14) and
latch the center pole in place during transport of the vibratory plate on
the loading area of a transport vehicle.
The engine must be stopped when using the integrated transport
device. Lubrication of the engine is not guaranteed if the engine is
running when the plate is in transport position.This could lead to
serious engine damages.
Furthermore the danger exists that oil will spill out of the crankcase
breather.
Note: Also observe the regulations in the chapter “Safety instructions“.