HPU-20 Hydraulic Power Unit
16
Part No. 14-MAN-35, Rev. 0-0616
E.H. Wachs
Figure 3-4. Attach power to the connector on the
electrical panel of the HPU-20.
Connect Hydraulic Hoses
NOTE:
The power unit is fac-
tory-set to operate at 1800
psi (124 bar). It is extremely
important that the hoses used
with this unit are rated for
3000 psi (186 bar) or higher
pressure.
Connect the hoses to the quick disconnect fittings as shown.
Figure 3-5. Connect the hydraulic hoses to the fittings
as shown.
Return
(tank) port
Pressure
port
