Chapter 2, Safety: Operator Safety
E.H. Wachs
Part No. 14-MAN-35, Rev. 0-0616
9
IMPORTANT
This alert indicates a situation that, if not avoided,
may
result in
damage to the equipment
.
Protective Equipment Requirements
For additional information on eye and face protection, refer
to Federal OSHA regulations, 29 Code of Federal Regula-
tions, Section 1910.133., Eye and Face Protection and
American National Standards Institute, ANSI Z87.1, Occu-
pational and Educational Eye and Face Protection. Z87.1 is
available from the American National Standards Institute,
Inc., 1430 Broadway, New York, NY 10018.
Hearing protectors are required in high noise areas, 85 dBA
or greater. The operation of other tools and equipment in the
area, reflective surfaces, process noises, and resonant struc-
tures can increase the noise level in the area. For additional
information on hearing protection, refer to Federal OSHA
regulations, 29 Code of Federal Regulations, Section
1910.95, Occupational Noise Exposure and ANSI S12.6
Hearing Protectors.
Safety Procedures
All safety requirements listed below are those generally
applicable to hydraulically-powered machinery but are not
intended to be an all-inclusive list. They are intended as
guidelines only and will assist in avoiding risk of injury
when followed by qualified, experienced personnel. These
WARNING
Always wear impact resistant eye pro-
tection while operating or working near
this equipment.
CAUTION
Personal hearing protection is recom-
mended when operating or working near
this equipment.
