92
UR3274U - User manual
8.2
Dual Timer
This option enables two Timers and the time is selectable by
the operator: timers
cannot be started at same time
.
To achieve this operation set parameter 63 as follows:
•
d . tm .s.
(Double Timer Seconds) time-basis in seconds (mm.ss)
•
d . tm . m .
(Double Timer Minutes) time-basis in minutes (hh.mm)
Check the table below for the Start procedure:
Press
Effect
Do
1
FNC
Press until
tim. 1
or
tim.
2
visualized on display 1.
2
Start the Timer. Display
2 shows decrementing
time and Led
R
switches
on (fixed for timer 1,
flashing for timer 2).
Back to point 1, after
selection of running
Timer
press
to stop
counting. Led
R
switches off.
At elapsing of Timer the led
R
switches off and display
2 flashes, showing the programmed time until any key is
pressed. Start/Stop of Timer by digital input
is NOT available
for Dual Timer mode.
8.3
Dual Sequential Timer
This option enables two Timers and the time is selectable by
the operator. At elapsing of Timer 1, counting of Timer 2 will
automatically start . At elapsing of Timer 2, counting will stop.
To achieve operation of dual sequential Timer set the
parameter 63
tmr.f.
as follows:
•
d .s. t.s.
(Double Sequential Timer Seconds) time-basis in
seconds (mm.ss)
•
d .s. t. m .
(Double Sequential Timer Minutes) time-basis in
minutes (hh.mm)
To start/stop the Timer, press key
FNC
for 1“. During the counting,
