INSTALLATION INSTRUCTION
InvisiLED Tunable White
T24-TW3
Waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program
. Oct. 2022
7.
8.
If necessary, cut InvisiLED Tunable White tape light to desired length at line indicated with scissors icon. The tape allows for a cut every
4-inch interval. The cut line is shown on both sides of connector. (See FIG. 11)
FIG. 11
9.
Mount InvisiLED Tunable White tape light: clean surface before mounting. Peel off 3M VHB adhesive backing covers off as strip is
installed, pressing firmly to mounting surface in increments. (See FIG. 12)
FIG. 12
10.
Joining between InvisiLED Tunable White tape light
InvisiLED Tunable White tape light has a polarity which means the red color bar has to be same side (See FIG. 13). Joining a tape in an
opposite direction will lose an ability to control the tape even though the tape lit up.
Joining tape together (If necessary), the following accessories can be used to join between tapes section depending on your application:
Tape to Tape Connector (T24-MM-WT), See FIG. 13
FIG. 13
Peel back during
installation
Adhesive back cover
RED Color Bar
RED Color Bar
