WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. June, 2014
INSTALLATION INSTRUCTION
Tube - LED Wall Mount
WS-W2605
PREPARATION
1. Shut off the power at the circuit breaker and remove existing
fixture, including the crossbar.
2. Carefully unpack your new fixture and lay out
all the parts on a clear area. Be careful not to lose
any small parts necessary for installation.
MOUNTING THE FIXTURE
(Fig. 1)
3. Secure mounting backplate (D1) to the
junction box (F1) using junction box screws (B1).
The side of the mounting backplate
marked “GND”(E1) must face out.
CONNECTING THE WIRES
(Fig. 2)
4. Connect the electrical wires as shown in Fig. 2,
making sure that all wire connectors (A1) are
secured. If your outlet box has a green or bare
copper ground wire, connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s
ground wire directly to the backplate (D1) using
the green screw (E1) provided. After wires are
connected, tuck them carefully inside the junction box.
5. Place the fixture over the mounting backplate (D1)
and secure with screws (C1) and gasket (G1).
COMPLETING THE INSTALLATION
(Fig. 3)
6. To prevent moisture from entering the outlet box
and causing a short, use clear caulking (i.e. indoor/outdoor
silicone sealant) to outline the outside of fixture backplate
where it meets the wall leaving a space at bottom to
allow moisture a means to escape (Fig.3).
100%-10% DIMMING
COMPATIBLE WITH THE FOLLOWING ELECTRONIC
LOW VOLTAGE (ELV) DIMMERS
Lutron
DVELV-300P ,SELV-300P, DVCL-153P ,DVCL-153P
Leviton
VPE04, IPE04, IPI06, IPM06, VPI06
FIG.2
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare Copper
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
A1
F1
B1
C1
G1
C1
D1
B1
E1
