5 - 1
SPARE PARTS
APRIL 2021
32DFR108.C
FR2SS-SERIES SERVICE MANUAL
V.
FOLDOVER RAMP SPARE PARTS
he parts layouts and lists in this chapter apply to the Ricon FR2SS, FR2G and FR2N Series FoldOver Low-Floor
Vehicle Access ramps when installed in a transit vehicle. Replaceable ramp parts are illustrated in exploded
views of major lift assemblies, which show smaller assemblies and components with reference numbers. Each
associated parts list contains reference numbers, parts descriptions, and Ricon part numbers.
Each accompanying parts list contains figure item numbers, part descriptions, quantities used, configurations and the
Ricon part number. To order parts, locate part on an appropriate diagram and note the figure item number. Find the
figure item number on the accompanying parts list and use the part number in the far right column. Note that parts
identified with (REF) in the QTY column of the spare parts list are for reference purposes only and are not sold for spare
parts.
NOTE:
•
Most items that are described as “kits” contain a single part (plus hardware). Therefore, you may need to order
more than one kit if the part is used more than once on the assembly shown.
•
Small, inexpensive hardware items are supplied in a minimum quantity of ten, and are packaged in a bag. A
single bag may provide more parts than you need, or you may need multiple bags when working on a large
assembly. The QTY column indicates how many individual parts are used on the assembly shown; you will need
to determine the number of bags required for your task.
•
The reference numbers for some parts have more than one part number listed. This occurs when variations of a
part are used on different ramp models. These parts are followed by a model designation (FR2SS01-10000000,
FR2SS02-10000010, etc).
PARTS DIAGRAMS
PAGE
FIGURE 5-1:
FR2SS DECAL PART NUMBERS AND LOCATIONS ....................................................................
…5-2
FIGURE 5-2:
FR2SS RAMP ASSEMBLY .............................................................................................................
…5-4
FIGURE 5-2.1:
FR2G RAMP ASSEMBLY ................................................................................................................. 5-10
FIGURE 5-2.2:
FR2N01 RAMP ASSEMBLY ............................................................................................................. 5-16
FIGURE 5-3
HYDRAULIC COMPONENTS AND FITTINGS ................................................................................. 5-18
FIGURE 5-4:
ELECTRICAL HARNESSES AND COMPONENTS ......................................................................... 5-20
FIGURE 5-5:
ROTARY ACTUATOR ASSEMBLY .................................................................................................. 5-24
LIFT SPECIFICATIONS
.................................................................................................................................................
5-26
T
