30
www.nieaf-smitt.nl
Nieaf-Smitt is a brand name of Mors Smitt
When using test leads or probes, keep your
fingers behind the finger guards
Remove test lead from meter before opening
the battery door or meter case
Use the meter only as specified in this manual
or the protection by the meter might be
impaired
Always use proper terminals, switch position
and range for measurements
Verify the meter’s operation by measuring a
known voltage, if in doubt, have the meter
serviced
Do not apply more than the rated voltage, as
marked on the meter, between terminals or
between any terminal and earth ground
Only replace the blown fuse with the proper
rating as specified in this manual
Use caution with voltages above 30 VAC RMS,
42 VAC peak, or 60 VDC. These voltages pose a
shock hazard
To avoid false readings that can lead to electric
shock and injury, replace battery as soon as
low battery indicator
Disconnect circuit power and discharge all
highvoltage capacitors before testing
resistance, continuity, diodes, or capacitance
Do not use meter around explosive gas or
vapor
To reduce the risk of fire or electric shock do
not expose this product to rain or moisture
