WABRO sc ul. Arki Bozka 2A, ul. Arki Boÿek 2A
NIP: PL6263032331 | Regon: 381911373
Wabrotech.pl
10. CHECKS:
11. SOLVING BASIC PROBLEMS:
7
Broken switch
Drill does not work
Check the voltage in the socket or
PROBLEM
Check the power cable
The power cable is incorrectly connected or damaged
Inspection activities should be carried out with the plug removed from the socket.
Replace the brushes with new ones
whether the fuse has blown
POSSIBLE CAUSES
Check the condition of the electrographite brushes. If they are found to be shorter than 4 mm, replace them with
new ones. Please note that ceramic cutting residues are corrosive.
The device should be carefully maintained. Check that the moving parts of the device function properly and are not
jammed, that the parts are not cracked or damaged, which could affect the proper functioning of the device. Have
damaged parts repaired before using the device. Many accidents are caused by improperly maintained power tools.
Worn motor brushes
Replace the switch with a new one
Before starting the magnetic drilling machine, it is necessary to check the condition of the working tool. Any loss or
breakage of the drill disqualifies the tool. Install new ones free of defects.
There is no mains voltage in the socket
Push the plug deeper into the socket,
Do not leave the machine uncleaned at the end of work. This can lead to corrosion of individual components of the
drill.
POSSIBLE SOLUTIONS
Machine Translated by Google
