1. SAFETY WARNINGS
WABRO sc ul. Arki Bozka 2A, ul. Arki Boÿek 2A
NIP: PL6263032331 | Regon: 381911373
Wabrotech.pl
2
they left it in a safe running condition.
service.
• The machine should only be connected to the mains when working.
• It is forbidden to use drills that do not meet the technical parameters given in
• Pull the plug out of the socket before changing tools or putting the tool away. This
operation emphasis.
• Do not use tools contrary to their intended use.
Keep cutting equipment sharp and clean.
Carry out these operations after the machine has come to a complete stop.
• Before the first start-up, check that the supply voltage corresponds to that specified at
and they are easier to drive.
precautionary measure prevents unintentional activation of the device.
• In the event of a power failure, the machine must reach a safe state. After the power supply is
switched on, the machine cannot automatically continue the interrupted operation.
• Do not use the machine near containers with flammable liquids or gases.
plugs from the socket.
• Each time before starting work, check the technical condition of the tool. If damage, cracks, scratches
or deformations are detected, do not start the device - replace the tool with a defect-free one.
• Unauthorized persons are not allowed in the workplace.
• When starting the machine, we must check whether the previous users or service technicians
• Keep your hands away from the rotating spindle, do not remove the spoil with your hands or other objects.
User Manual.
• Carefully maintained cutting tools with sharp cutting edges are less likely to jam
value nameplate.
• During work, use protective equipment: work clothes, non-slip shoes, protective glasses. Long hair
should be tied up and hidden under a hat. Gloves are not recommended.
• During operation, do not overload the machine - use only necessary for proper operation
• Keep your hands away from the cutting zone. The cutting tool that the machine is equipped with has
cutting edges and during operation it rotates at a very high speed, creating a risk of injury due to
splintering.
• All guards responsible for safety must be maintained in full technical condition. If they are damaged,
they must be repaired or replaced immediately.
• Do not lift the machine by the power cable and do not pull the cable when pulling it out
• It is forbidden to leave the machine in the rain or use it in the presence of moisture.
• The machine may be used by a person who has thoroughly read and understood the content of the Manual
• Keep power tools out of the reach of children when not in use. Do not allow the tool to be used by
persons who are not familiar with it or have not read these regulations. Power tools used by
inexperienced persons are dangerous.
• Do not work with a dull tool.
Machine Translated by Google
