Wabrotech.pl
WABRO sc ul. Arki Bozka 2A, ul. Arki Boÿek 2A
NIP: PL6263032331 | Regon: 381911373
4. INTENDED USE OF THE WT28RE MAGNETIC DRILL
5. LIMITATIONS ON USE:
3. TECHNICAL DATA
4
max. Wed. Drilling (full drill)
The magnetic drilling machine
is suitable for drilling in ferromagnetic materials (e.g. steel), during installation,
shipbuilding, bridge works, crane production, assembly works, locksmith works, assembly of steel structures, etc.
Do not use a power tool with a defective on/off switch. A power tool that cannot be switched on or off is dangerous and
must be repaired.
max. Wed. Drilling (tube drill)
Reverse rotation (threading)
Do not overload the device. Only use the power tool provided for this purpose. The right tool works better and safer in
the specified range of applications.
WT28RE/ 2080W
Magnetic drills cannot be used on workpieces during arc welding. The welding current could damage the machine.
The device is suitable for both core and full drilling. The device can be used horizontally, vertically and overhead. Care
must be taken that there is sufficient surface area and thickness
(min 10mm)
of the ferromagnetic material available for
the transfer of the magnetic holding force. The contact surface of the workpiece with the electromagnet should be flat,
but it can be unmachined. Remove rust and scale, as well as paint and filler layers from the surface of the workpiece.
When drilling in materials less than 10 mm, a steel sheet of sufficient thickness should be placed under the workpiece
so that the electromagnet can adhere to the substrate with greater force. Never place magnetic drills on insulating
materials (e.g. wood, concrete, etc.).
max. Working stroke
Magnetic force Net/
gross weight
Please note that the magnetic force disappears when the mains power is interrupted (when the power fails,
the plug is pulled out of the socket), we recommend that you always hold the drill with a safety belt.
Tapered spindle MT3 0-300
rpm
Power tools, accessories, tools, etc. must be used in accordance with these regulations and as intended for this special
type of appliance. The working conditions and the activity to be carried out must be taken into account. The use of power
tools for work other than those intended may result in a hazardous situation.
230V/50Hz
Model / motor power
Voltage / frequency Tool
holder Speed control
13800 N
18/27 kg
Unauthorized changes in the mechanical and electrical structure, any modifications, maintenance activities not described
in the Operating Manual will be treated as illegal and result in the immediate loss of Warranty Rights.
M3-M22
28mm
60mm
215mm
The machine may only be used with the drill bits described in this manual.
Machine Translated by Google
