WABECO F1200 high speed, Operating Instructions Manual

Page: 11 / 156

11
1. Important safety notes
1.1 Intended use
The milling machines described in these operating instructions are designed for the processing of
metal, plastic and timber only.
To ensure safe operation of the milling machines, the regulations set out in the chapter: "Safety
regulations" must be observed.
1.2 Improper and incorrect use
The milling machines described in these operating instructions have been developed and
manufactured for the purpose named above. Walter Blombach GmbH accepts no responsibility for
property damage and personal injury caused as a result of not intended and incorrect use of the
milling machines.
1.3 Modifications to the machine
For reasons of safety, it is forbidden for the user to make modifications of any type to the milling
machine.
Walter Blombach GmbH accepts no responsibility for property damage and personal injury caused as
a result of any modifications to the milling machine by the user that have not expressly been
authorised by the company.
1.4 Safety regulations for proper use
The machine may represent a source of danger if it is not used correctly. For this reason, it is
important that the following safety regulations are read attentively and observed carefully.
Every person that operates the machine, maintains or repairs it, must have read the operating
instructions, and in particular, the safety notes prior to putting the machine into operation.
In order to fulfil these requirements, these operating instructions must accompany the machine
throughout its entire lifetime and be available for research.
In the event that the machine changes owners, the operating instructions must thus be passed on to
the new owner along with the machine.