© W
+
W 12/2018 Version 15
533092
ATTENTION
If there are no other equal possibilities of holding on to, the ladder must jut out at
least .0m beyond the exit, according to EN 8-0.
For safety reasons an emergency stop switch is necessary in the pit. It must be
oprated before unfolding the ladder.
Safety advices
ATTENTION
For professional use of the ladder, see the instructions, affixed to every ladder.
ATTENTION
All safety instructions and all safety measures for lift mounting have to be
considered while mounting.
Assembly operations at lift systems have to be accomplished only by qualified per-
sons.
TRI-KLAPP 5
ATTENTION
If ladders are mounted in lift shafts, the ladder and its attachments must not extend
into the moving parts of the lift.
Whether the pit ladder is in use or not, there shall be in the pit sufficient space to
accommodate a rectangular block not less than 0,5m x 0,7m x ,0m resting on one
of its faces, when the car rests on its fully compressed buffers.
This is also valid for an uncontrolled sinking of the car.
ATTENTION
In opposition to the previous description, the ladder can alternatively be mounted
parallelly to the landing door. There is no restriction mentioned in EN 8.
Please notice that the danger of restarting the lift without having folded in the ladder
before is much higher than in case of vertical installation to the landing door.
Possibly the Head of Construction of your company is not informed yet about the
change in the instruction. In case of doubt we therefore recommend to consult the
Head of Construction.
In either case the user is responsible for the chosen mounting option.
Hinweis:
The optional ACESSORY SET-N is required for a ladder according to EN 81-20 (not included in the scope of delivery).
Art.no.
Description
078380
Ladder ACCESSORY SET-N
Ladder ACCESSORY SET-N for
TRI-KLAPP 115
Accessories to ladder type TRI-KLAPP 115
ACCESSORY SET-N for the mounting or retrofitting of
a safety switch with forced actuation 1NC/NO onto
the TRIKLAPP 115.
Construction acc. to EN 81-20
