background image

17 

 

 

Check for proper tire pressure (45 psi) and condition. 

 

Always wear personal protective equipment (helmet, protectors, etc.) 

 

Beginners and older people must check the speed mode, always use the slow (ECO) driving 

mode. 

 

Set the correct handlebar height. 

 

Make sure that the handlebars and the folding mechanism are properly secured. 

 

Check the battery status. 

BATERRY 

12 months warranty for battery life 

– we guarantee that battery's nominal capacity does not fall 

below 70% of its total capacity within 6 months of the product

’s sale. 

 

For  proper  operation  and  safe  use  of  the  battery,  follow  the  instructions  in  the  manual.  Stop 

using  the  battery  immediately  if  the  battery  is  damaged,  leaks  liquid  or  you  smell  abnormal 
odor. 

 

Battery  lifespan  is  limited.  If  you  use  a  battery  that  exceeds  normal  lifespan,  the  charging 

frequency may increase, and the scooter range will be reduced. 

 

Do not open or throw of the battery in a fire. Do not insert foreign objects into the battery. 

 

Do not touch the battery with metal objects. The battery may explode or be damaged. 

 

Use only the original charger. 

 

Follow local regulations and laws while driving. 

 

You can charge the battery continuously. 

 

The ideal battery charging temper

ature is +10 ° C to +30 ° C. 

 

If you use the battery for an extended period, its temperature will be higher. This is a normal 

battery condition. 

 

If you use the battery in a cold environment, the range is lower. 

 

Do not repair or modify the battery yourself. 

USE 

 

Before use, make sure that all parts are properly assembled, tightened and not damaged. 

 

Check the brakes. 

 

Check that the folding mechanism is properly locked. 

 

Make sure the battery is properly charged. 

 

Make sure the tires are in good condition. 

 

Check the handlebar. It must be properly tightened. 

 

Get  to  know  the  surroundings,  make  sure  that  you  do  not  endanger  yourself  and  your 

surroundings. 

 

Do not drive on slippery surfaces. 

 

Wear personal protective equipment including a helmet and a sturdy shoe. 

 

Do not use if outdoor conditions are poor. 

 

Moisture reduces braking efficiency. 

Summary of Contents for 21998






















Reviews: