www.prolight.co.uk
Antenna Distribution System
User Manual
5
Installation
Receiver 1
Receiver 2
Receiver 3
Receiver 5
Receiver 4
After installing the radio microphone receivers and ADS4 into a secure rack enclosure, using the short
patch cables supplied, link the receivers individually taking care to avoid any cross wires between A and
B channels. Additional ADS4 units maybe cascaded from the ANTENNA OUT link connectors.
Connect the RPA2 UHF remote panel antennae to the ANTENNA A and ANTENNA B outputs using either
the supplied 5m RF cables, or high quality 50Ω RF cables of up to 20m in length. All RF cables should be
kept as short as possible in cable length to minimise any losses in the system.
Connect the DC link cables from the ADS4 to the receivers individually taking care to ensure all
receivers are of 12V DC ve power type.
Connect the DC power supply to the DC IN socket and switch on the power.
The power indicators on the front panel of the ADS4 and on the spine of the RPA2 will illuminate to
indicate the units are powered on.
