www.prolight.co.uk
Antenna Distribution System
User Manual
4
Technical specifications
01 -
Power ON/OFF switch
- When the distributor is
connected to the appropriate power source, and the
switch in the ON position, the LED within the switch
will illuminate.
02 -
Antenna A/B input connectors
- BNC sockets For the
connection of two WAudio RPA UHF antenna paddles.
Each output provides a bias of 9V 100mA (ve).
03 -
RF outputs
- RF outputs via BNC sockets for connection
to the radio microphone receivers.
04 -
DC power input
- The ADS4 requires a regulated, 12-15V
5A DC power supply. Polarity should be ve.
05 -
DC power outputs
- 12-15V DC power outputs for
supplying up to four radio microphone receivers,
each up to 500mA. The DC voltage is a direct output
from the DC power input.
06 -
RF link
- RF outputs via BNC sockets for connection
to the radio microphone receivers or additional
ADS4 distribution units.
01 -
BNC RF output connector
- For the
connection of a high quality 50Ω
RF cable 5-20m in length.
02 -
Swivel bracket
- The bracket features a
5/8” female screw thread for connection
to industry standard microphone stands.
The bracket maybe tilted to offer optimal
positioning.
03 -
Stand thread adaptor
- Supplied to allow
the integral swivel bracket to be adapted
down from 5/8” female to 3/8” female
screw thread.
04 -
Power Indicator LED
- When the bias
voltage supplied to the RPA2 is between
8-12V DC the power indicator LED will
illuminate to confirm the internal booster
is active.
05 -
Bracket tightening screw
- The screw
maybe tightened to prevent movement.
Tighten the screw in a clockwise direction
using a standard screwdriver.
POWER
ADS4
UHF ANTENNA DISTRIBUTION SYSTEM
450-1000MHz
ANTENNA B
ANTENNA B OUTPUT
INPUT
+9V DC BIAS
OUTPUT
ANTENNA A
INPUT
+9V DC BIAS
OUTPUT
ANTENNA A OUTPUT
DC OUTPUT
www
.pr
oli
gh
t.co
.uk
DC INPUT
12V~18V
5A
01
02
06
06
03
04
05
03
02
ADS4 UHF Antenna Distributor
RPA2 UHF Remote Paddle Antenna
400-1000MHz
RPA2
05
04
02
01
03
