26
5.1.2
DS77 Lite&DS77C Lite Installation Steps
DS77 Lite&DS77C Lite product transmits the required data to host by Ethernet cable, and it
doesn’t support Power over Ethernet, so the power adaptor shall be used.
The steps are as below:
1. Mount the camera in an appropriate fixture, e.g. a camera bracket;
2. Insert the DC connector of the power supply adaptor into the 12V~24V DC Jack at the back
of the camera;
3. Connect the adaptor to power source;
4. Please do set the IP address of the camera and host PC in the same segment;
5. The default IP address of DS77 Lite&DS77C Lite is 192.168.1.101, you can change the IP
address by the VzenseDSUTool;
Please do read the document before reconfigure the camera:
5.1.3
POE Mode Installation (Only For DS77 Pro&DS77C Pro)
What is PoE+ (Power Over Ethernet)
Power over Ethernet (PoE+) is a technology that lets network cables carry electrical power. It
simplifies the topology of the Ethernet system by reducing the dedicated power cable, a PoE
switch or injector shall be in use to support the PoE feature.
For Vzense DS77 Series camera, the POE Switch or POE injector needs to support IEEE
802.3at-2009 standard also known as PoE+, which can provide up to 25.5W, or IEEE 802.3bt-
2018 standard also known as PoE++, which can provide up to 60W. Otherwise the product
may not work well at long range mode.
Summary of Contents for DS77 Lite
Page 1: ...1 Vzense DS77 Series ToF Camera User Manual ...
Page 32: ...32 ...
