22
5.2.4 Scattering Effect
Scattering light effect is a noise factor to ToF products, it is caused by multiple
reflection inside the lens of camera or the cover of camera.
To eliminate the scattering light effect, you should:
1. Keep the cover glass of the camera clean;
2. Do NOT place any other cover glass in front of the camera;
3. Keep the camera working environment as clean as possible;
6 Installation
6.1
Hardware Installation
You have read and understood the warnings listed under "Precautions" on Chapter 2;
To achieve reliable distance measurements, please follow below tips:
Better not using the camera in strong sunlight. If have to, keep the ambient light
below 50k Lux.
Do NOT place any objects in the scene that are not part of your intended
target, especially mirrors or other shiny surfaces/objects.
Maintain a stable housing temperature during operation.
Take measures to provide cooling to camera
Mount the camera robustly.
All accessories are ready
6.1.1 Ethernet Mode Installation
In this mode, the camera transmits the required data to host by Ethernet cable, so the
power adaptor shall be used.
The steps are as below:
1. Mount the camera in an appropriate fixture, e.g. a camera bracket;
2. Plug the M16-8 socket end of the Ethernet cable (VZENSE-LAN-8P-A) into the
M16-8 LAN socket jack at the back of the camera, and plug the other RJ45 end into
the Ethernet port of your host processor;
3. Insert the M16-10 socket of the power supply adaptor into the M16-10 MFP
connector at the back of the camera;
4. Connect the adaptor to power source;
6.1.2 POE Mode Installation
What is POE (Power Over Ethernet)
