11
12
13
7. Handle
8. Floor Setting Control
9. Floor Setting Indicator Light
10. Steam Power Switch
11. Storage Hook (rotates 360º)
12. Main Body Assembly Screw
13. Power Cord
Before Using Your steam mop
Be sure to read ALL instructions and warnings before using your steam mop.
WARNING
Your steam mop is designed to clean hard floor surfaces that will withstand high
heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that
have been treated with wax or some no-wax floors, the sheen may be removed
by the heat and steam action. It is always recommended to test an isolated area
of the surface to be cleaned before proceeding. We also recommend that you
check the use and care instructions from the floor manufacturer.
Helpful Hint:
1. When heated, never leave the appliance in one spot on any surface for any
period of time.
2. Always empty water from water tank after use.
CAUTION
The appliance emits very hot steam to sanitize the area of use. This means that the
steam head, Microfiber Pad and Carpet Glide get very hot during use. Care should be
taken when using this appliance. DO NOT touch them during use except in the
approved manner as outlined in this manual.
Technical information:
Rated voltage: 220-240V
Rated frequency: 50Hz
Output power: 1600W (+5%,-10%)
Water tank capacity: 400 ML
With a ready indicator. When the appliance is connected to power supply, turn on the
power switch, after 25s the mop start to emit the steam
The angle of the rotation axis in the cleaner is greater
；
1. Water Tank Release Button
2. Detachable Water Tank
3. Power Cord Organizer (bottom)
4. Assembly Screw (x1)
5. Carpet Glide
6. Microfiber Pads (x1)
This product is NOT for space heating purposes.
IMPORTANT:
