Wet & Dry Vacuum
•
Don’t switch on solution pump.
•
Remove the solution tank.
•
Use on flat surface.
•
Stop the appliance immediately if any water or solution bubbles spray out. Check the levels in the
collection tank. Clean the water tank and float assembly if required.
•
Change the dust bag if full or damaged.
Wet & Dry vacuum instruction
1.
Take out top vacuum part and fix the dust bag.
2. Hold the top hand, take off the floater frame as per direction instruction, check the floater frame, strainer,
filter, floater bottom, HEPA and check whether all are fixed in right position.
