WWW.VYNCO.CO.NZ
4
The following parts should be inside the carton:
• E1V2 charger
• Black metal mounting plate
• Installation manual
• User operating manual
• Installation screws
If any of the parts are missing or damaged contact your supplier or Vynco for assistance
before installing the charger.
CARTON CONTENTS
Remove 1 screw from each side
Remove 1 screw from the bottom
• Select a suitable mounting position on a wall.
The position must be at least 800mm above the floor or
ground and 300mm from any wall or corner. Ensure the
mounting plate is level – use a spirit level on the top face.
• Using the two mounting holes in the centre line of the plate,
screw the black mounting plate to the wall using suitable
mounting screws.
• Ensure the mounting plate is screwed securely into timber
a wall stud or concrete.
To mount the E1V2 Electric Vehicle Charger on a wall:
• Remove the black mounting plate from the charger.
MOUNTING INSTRUCTIONS
