May 2, 2011
PREPARATION
Equipment Ratings
8
Part Number 11694 Rev 1.6
JACE-700
MOUNTING AND WIRING GUIDE
|
Environment
• Operating temperature range: 32°F to 122°F (0°C to 50°C).
• Relative humidity range: 10% to 90% at 77°F (25°C), non-condensing.
• Mechanical ambient conditions are as follows:
— Vibration, in operation: 5 to 9 Hz: 3.5mm amplitude, 9 to 150Hz: 1g.
— Shock resistance, in operation: 15g acceleration, 11 ms duration.
• Storage temperature range: 32°F to 158°F (0°C to 70°C).
• Storage relative humidity range: 5% to 94%, non-condensing.
Equipment Ratings
Electrical
• Input voltage range: 15Vdc (
DC
only
).
Sourced from separate AC power supply, 90Vac to 264Vac, 50/60Hz.
• Power consumption: 20VA maximum.
Preparation
Unpack the controller and inspect the package contents for damaged or missing
components. If damaged, notify the appropriate carrier at once and return any
damaged components for immediate repair or replacement. See
•
•
Included in this Package
Included in this package you should find the following items:
• a JACE-700 controller.
• These
JACE-700 Mounting and Wiring Instructions
, Part Number 11694 Rev 1.6
• a hardware bag containing the following items:
— Two (2) 6-position screw terminal plugs, one for integral contact inputs (door
tamper, UPS battery OK, UPS AC present), one end-mount to wire
RS-485/power to optional remote expansion devices.
— One (1) 2-position screw terminal plug for external sealed lead-acid (SLA)
rechargeable battery (not provided).
— One (1) grounding wire, with quick-disconnect 0.187" female connector.
Material and Tools Required
The following supplies and tools are typically required for installation:
• NPB-PWR-UN universal AC power supply module, 90-263 Vac input, 15Vdc
30W output, DIN-mount capable, with grounding wire.
Alternatively, a WPM-
XXX
wall-mount AC adapter can power the controller
only. You must cut off the adapter’s barrel plug end, and then wire leads into the
controller’s end connector. A multimeter is needed to check polarity.
