21
PRESSURE WASHER KIT 2465I
Symptom
Cause
Reccomended Action
Machine refuses to start
Machine not plugged in
Defective socket
Defective extension cord
Plug in machine
Try another socket
Switch off other machines
Try without the extension cord
Fluctuating pressure
Pump sucking air
Valves dirty, worn out or stuck
Pump seals worn out
Check that hoses and
connections are airtight
Clean and replace or refer to
local distributor
Clean and replace or refer to
local distributor
Machine stops
Incorrect mains voltage
Thermal sensor activated
Nozzle partially blocked
Check that the mains voltage
corresponds to specification
on the model tag
Leave the washer for 5
minutes to cool down
Clean the nozzle
Machine pulsating
Air in inlet hose
Inadequate supply of mains
water
Nozzle partially blocked
Water filter blocked
Hose kinked
Allow machine to run with
open trigger until regular
working pressure resumes
Check that the water supply
corresponds to specifications
required. NB! Avoid using
long, thin hoses (min. 1/2”).
Clean the nozzle
Clean the filter
Straighten out hose
Machine starts, but no water
comes out
Pump/hoses or accessory
frozen
No water supply
Water filter blocked /Nozzle
blocked
Wait for pump/hoses or
accessory to thaw
Connect inlet water
Clean the filter /Clean the
nozzle
